Category Archives: Recyclability

MMM Celebrates Earth Day

On this Earth Day, Magnificent Metal Monday (MMM) turns to our friends at Metal Roofing Alliance to see how metal stacks up against other roofing materials in being environmentally friendly. According to MRA, metal is considered the most environmentally friendly and sustainable roofing material available based on its sustainability, energy savings and value. Metal roofs are 100% recyclable and are made with a minimum of 25% recycled material, depending on the type of metal. Metal roofs can also often be installed over an existing roof, eliminating the environmental impact of disposal.

Continue reading

Sustainable Steel – Roadmap into the Future

FF Journal’s March issue brings us an in-depth look at how structural steel is at the core of eco-friendly building projects. The structural steel market is poised to play a significant role in adopting a new project delivery model. The article examines how changing the traditional steel supply chain model would help advance the industry into a more efficient and greener one.

Continue reading

Recycling Makes the Heart Grow

A recent article in Metropolis Magazine asks, “When a building comes down, where do its materials go?” Recycling five essential materials—steel, concrete, drywall, glass, flooring—turns up different challenges, but architects can be part of the solution. As the environmental crisis worsens, we must ask: Can we reduce our demand on new resources? The article

Continue reading

Check out this 3D-printed, vehicle-powered house: METALCON demo

This thing is crazy.

METALCON has a damn good name. It also had some damn good demos at the Baltimore Convention Center this week.

The event was a major gathering for construction pros looking for new ideas. The exhibit hall had lots of tools, and demos about the latest ways to build. To kick off the conference, however, Roderick Jackson challenged attendees to think bigger.

“We literally build buildings the same way we’ve built them for centuries,” said Jackson, who heads up the Building Envelope Systems Research Group at the Department of Energy’s Oak Ridge National Laboratory in Tennessee.

Instead of the latest tools, Jackson brought a whole house to the convention. Called the Additive Manufacturing Integrated Energy (AMIE), it’s a prototype of a home that shares energy between the house itself and a hybrid car.

Roderick Jackson inside AMIE. (Photo by Stephen Babcock)

Being a DOE project, one problem it’s solving is the fact that buildings use lots of energy. AMIE points toward energy usage that doesn’t have to rely completely on a grid. Power from solar panels and the electric vehicle batteries flows back and forth through a wireless system developed at national lab. The vehicle has a natural gas generator that produces power for the home.

There’s also lots of new approaches in the construction. The building was entirely 3D printed (on the world’s largest 3D printer). That makes a zero-waste construction process. It’s made of polymer, but Jackson said it’s designed to get folks thinking about what materials available to them can be used. Inside, the wall cavity was reduced from 8 inches to 1 inch to make room for next-generation insulation. The one-room design is simple, complete with Murphy bed. But that’s also a canvas to create.

AMIE's windows. (Photo by Stephen Babcock)

The speed of the project also marked a big change, process-wise. Jackson said the project was completed in nine months. That’s fast for government, but the level of change points to government’s strengths in taking on the risk.

“The role of government is to take on the risk the private sector wouldn’t take on,” he said. “Now industry can take what we did and move it forward.”

(Photo by Stephen Babcock)

Corporates were already involved in the prototype phase. Jackson’s team got partners like Alcoa, Clayton Homes, GE Appliances, Tru-Design and NanoPore. They were excited about doing something that wasn’t only new, but also big.

“The biggest thing that I learned from this is people don’t get excited about incremental,” he said. Rather, partners and others really gathered around an idea “when you start throwing stuff out there that’s moonshot-type ideas.”

Click here for the original article, Thanks Technical.ly

3D Printing, Construction and the Millennials

maxresdefault (1)

3D printing, construction and the Millennials, yes we’ve grouped all three together for a reason. We’ve touched a bit on how 3D printing will change the construction industry for the better. Yes I said it for the better; I look at it as a huge opportunity for both manufacturers and the people out in the field. Now how does the millennial generation fit into the equation? Continue reading

Magnificent Metal Mondays

stelhouse

Another episode of Magnificent Metal Mondays is upon us and today we travel to Lubbock, Texas. Yes you guessed it The Steel House designed by steel sculptor Robert Bruno. Continue reading

How to Prepare for your Metal Roofing Jobs

Our friends over at http://www.designandbuildwithmetal.com recently published an article that pertains to a lot of the metal roofers out there. Contributing to the article was Harry Schouten of Advanced Architectural Sheet Metal & Supply.

Continue reading

Book your Hotel for METALCON now

Marriott1

You heard us right, housing is OPEN! We’ve opened it earlier this year so that you can take advantage of the early bird pricing on the official hotels Continue reading

A new way to harvest solar energy using metal nanoparticles and plasmon resonance

solarcell

Read this article this morning and it will certainly impact the metal construction industry. Take a read for yourself and let us know what you think. We are starting to see science and metal construction come closer together than ever. It’s always had that relationship, but it continues to be more complex. Anyhow read the article and let us know what you think.

http://www.zmescience.com by Tibi Puiu – Solar cell technology has improved dramatically over the past couple of year, yet it will be a long time before multi-junction cells – then kind that can reach efficiency well over 40% – will become affordable to small home owners or even large scale installation. New methods are always explored, however, each with its own angle to harnessing solar energy, benefits and disadvantages included. One of the biggest challenges to improving solar cell efficiency is collecting light frequencies that are outside the visible spectrum, and a new technique developed at Caltech makes use of a most interesting physical effect: plasmon resonance on the surface of metal nanoparticles.
Continue reading

Mention #METALCONDenver in your Social Media Posts

hashtags

So a few weeks back we had released the official hashtag for METALCON and we told you it would be #METALCONDenver. We would like for all of you to use the hashtag in order to promote the event across  Continue reading

Corporate Social Responsibility – What is your company doing?

CSR Corporate Social Responsibility Lifecycle

Interesting topic for a Friday right? Well, it can certainly be controversial as well as gratifying, depending of course if you and your company are doing your part Continue reading

Isaiah Industries – Exhibitor Feature

Isaiah Industries ebooth

Today’s exhibitor feature is our Diamond Sponsor, Isaiah Industries, and you can view their e-booth by clicking here. You can also visit their homepage by clicking here. Swing by their booth, 711, while at METALCON to enter their passport contest.

Do you have any plans October 1st?

300X250

We aren’t going to beat around the message here but if you are in the construction industry you really need to register for METALCON today. You can do that by clicking here.  You see  Continue reading

METALCON Hustle and Bustle

images (1)

That’s right we are working hard at the METALCON office to provide you with the most amazing trade show experience you’ll ever go to. However, in order  Continue reading

Want to be Cool?

register_now_button_blue (1)

We’ve posted every day that registration is open and the goal is to reinforce the thinking that you need to register as soon as possible. Think of it this way when you buy your plane tickets to go on vacation   Continue reading

MBCI – Exhibitor Feature

MBCI

For today’s exhibitor feature we visit our friends at MBCI. MBCI is the industry leading manufacturer of metal roof wall systems. You can view their profile by clicking here

Metal Grids and Asphalt Together

uselarge_Stamped_Asphalt_Streetprint_decorative_crosswalk

Last week I talked about why we do not have metal bricks or blocks and voila this morning I read a story about metal grids being put on hot asphalt that make it look like bricks were used. I find it really coincidental that a week ago  Continue reading

Drum Roll: FedEx Package Arrives for Me

fedex

So today while I was discussing some ideas with the METALCON team, our receptionist had dropped off a FedEx like the package you see above. I walked in my office and it was sitting on my chair  Continue reading

World Cup Trophy – Part 2

Following up from yesterday I felt like the post on the World Cup Trophy could have used a bit more so I decided to do a little research. I found this video on YouTube which discussed the Chemistry of the World Cup Trophy. Take a look at the video, I found it very interesting along with our host’s haircut.

Keymark – Exhibitor Feature

Keymark

For today’s exhibitor feature we travel to Colorado to feature Keymark. Keymark a leader in global steel systems is the most innovative solution for cold-formed-steel-building design, engineering, and fabrication. You can view their profile by clicking here

Register for METALCON

728X90

Registration for METALCON is now open.  You can register by clicking here and I know you are saying didn’t he just talk about this Friday? Yes I did but I wanted to bring it up again obviously. With the early numbers we are seeing  Continue reading

S-5! – Exhibitor Feature Today

 

 

 

 

 

S-5!-Metal-Roof-ClampsS5

For today’s exhibitor feature we travel to Colorado to feature S-5! Led by an industry leader, Rob Haddock, S-5!® has revolutionized the industry with his clamp innovation in making metal the most user-friendly roof type on the market today. You can view their profile by clicking here

Magnificent Metal Mondays

germany-trophy1

I hope everyone enjoyed their weekend and celebrated a German World Cup Championship yesterday. Since Germany won I think it would be fun to do something a bit different today on Magnificent Metal Mondays. If you haven’t guessed it yet then we will be talking about  Continue reading

METALFORMING – Exhibitor Feature Today

metalforming

For today’s exhibitor feature we travel to Georgia, the Peach State, to feature METALFORMING.  They are one of the leading providers of high-tech sheet metal component manufacturing machines in the industry. You can view their profile by clicking here.

Friday Fun – Create the Caption

safe-construction

Look at these geniuses, I mean seriously why even order that type of machinery if you are going to do this. They might as well get some ladders. You know the drill create a funny caption for this image.

Registration is now OPEN!!!

728X90

Registration for METALCON is now open.  You can register by clicking here and it is probably a good idea to do it early. Do you really want to miss the best construction show in the industry? I mean it is specialized to metal construction but it is still the best. Consider  Continue reading

METAL and Hashtags

hashtags

It’s Friday so we have a plethora of posts to talk about today, but I want to start with exactly what the title says, METAL and Hashtags. So we know what metal construction is, but  Continue reading

Throwback Thursdays – #TBT

throwback thursday

Here is a good Throwback Thursday moment that we dug up from the archives. We have a video of “The Best of METALCON 2011.” Check the video out and see if you can find yourself in the video. To see the video Continue reading

Construction Careers – Why Not?

Here is another great video on construction careers most likely directed at students who may not want to go to college. Watch and forward it on, and remember we do work in a great industry!!

BMW Gets Smashed by a Metal Slab at a Job Site

bmwcrash270614

Check this photo out, think BMW, yes the car, and a metal slab. You can read all about what happened by clicking here.