Category Archives: american welding society

Magnificent Metal Monday — The Dalí

Chance to meet acclaimed architect Yann Weymouth at METALCON 2021

Constructed in steel and glass, the “Enigma,” is the focal point of The Dalí’s new state-of-the-art building designed by world-renowned architect Yann Weymouth. St. Petersburg, Florida, is home to The Dalí Museum and sits directly across the bay from the Tampa Convention Center, home of METALCON 2021. The Museum is recognized internationally by the Michelin Guide with a three-star rating, deemed “one of the top buildings to see in your lifetime” by AOL Travel News, and named one of the ten most interesting museums in the world by Architectural Digest.

Continue reading

Fastener Selection and Installation are Essential to Any Job

LEARN FASTENER SELECTION & INSTALLATION GUIDELINES FROM AN INDUSTRY EXPERT THIS WEDNESDAY – FREE WEBINAR! REGISTER TODAY!

Fasteners are an essential piece of any metal building project. From the framing to the metal wall and roof panels, fasteners are necessary to put any metal building together. According to a Metal Construction News article, “With fasteners being such an important aspect of any project, it is also important to make sure that you are using the correct type of fastener for each piece of the building, since when improper screws are used, both the fastener and the panel system can fail.” Without the knowledge of properly selecting and installing fasteners, you may waste critical hours on a job site.

Continue reading

‘Metal Tapestry is Key Feature in Frank Gehry’s New Eisenhower Memorial’ – METALCON’s Magnificent Metal Monday

Metal tapestry at night at Eisenhower Memorial Commission; Credit: Architect Magazine.

Metal Tapestry is Key Feature in Frank Gehry’s New Eisenhower Memorial

According to Architect Magazine, the memorial, designed by Frank Gehry, FAIA, and executed in partnership with AECOM is scheduled to open on Septemeber 17. Its key feature is a metal tapestry 60 feet tall and 450 feet wide—almost three quarters of an acre of woven stainless steel, held aloft by piers the height of an eight-story building. The screen replicates a freehand sketch by Gehry himself of Pointe du Hoc, a D-Day landing site in Normandy. The tapestry is nearly transparent in daytime: The gridded façade of the 1961 Lyndon Baines Johnson Department of Education Building, designed by the firms Faulkner, Kingsbury and Stenhouse and Chatelain, Gauger and Nolan, is visible behind it. But when the sun goes down, the memorial comes alive by a special lighting scheme done by the New York firm L’Observatoire International that make the outlines of Gehry’s sketch glow brightly on the tapestry.

Continue reading

Trending – Modular Construction Industry

Photo Credit: Modular Building Institute (MBI)

Modular buildings are used in all building sectors including housing, education, public and health and it’s popularity is due to reasons of safety, efficiency and costs. Many in the METALCON community are involved with providing the materials to builders, designers and sub-contractors in this part of the construction industry. Recently, modular buildings have been in high demand because of the COVID-19 pandemic. In their recent issue of their Modular Advantage magazine, Modular Building Institute (MBI) takes a deep look into the industry’s response and how modular companies worldwide rose (and rising) to the challenges and opportunities presented by the crisis.

Continue reading

MMM – Dubai’s Museum of the Future

Credit: Killa Design

MMM (Magnificent Metal Monday) has its “eye” on the future. Designed by Killa Design and scheduled to open before the end of the year, the Museum of the Future is a complete deviation from the Dubai skyline filled with skyscrapers. The Museum has a torus shape (a donut shape) – a gleaming silver oval with an open center. As stated in an article published by Redshift by Autodesk, “The building looks almost like an eye keeping watch over this growing city, the largest in the United Arab Emirates (UAE).”

Continue reading

Magnificent Metal Monday

The NCAA Men’s Basketball Championship game tips off tonight with third ranked Texas Tech Red Raiders going up against #1 ranked Virginia Cavaliers. This is Texas Tech’s first appearance in the Championship Game, and could be Virginia’s first win in school history depending on the game’s outcome. After doing a little digging, both schools have some interesting architectural and steel facts!

Continue reading

Magnificent Metal Monday

200 Clarendon Street (formerly the John Hancock Tower), Boston; Photo credit: Wikipedia

Yes folks, last night was not a dream. The New England Patriots soared to their 6th Super Bowl victory last night and have now tied with the Pittsburgh Steelers for the highest number of Super Bowl victories. To pay homage to this amazing feat, we head to their home city of Boston where the tallest building in New England “soars” above the skyline. Located in the heart of Boston’s Back Bay neighborhood, 200 Clarendon Street, is one of Boston’s most significant landmarks. The iconic all-glass tower offers 360-degree panoramic views of the Back Bay, Charles River, Cambridge, the Public Gardens, Boston Harbor and the surrounding areas.

Continue reading

Magnificent Metal Monday

ArchDaily presents the most anticipated architectural projects of 2019. Some that made the list include two long awaited projects in Taipei include a new Performing Arts Center and a new Pop Music Centre. Closer to home, the “Vessel,” a 15-story tall sculpture comprised of 154 intricately interconnecting flights of stairs, and The Shed, a new cultural venue, are scheduled to open sometime this year at the New York City Hudson Yards.

Continue reading

Magnificent Metal Monday

Citic Tower in Beijing; photo courtesy:  The Skyscraper Center

The 528-meter (1,732 ft) Citic Tower in Beijing was the tallest building completed anywhere in the world this year. It has 108 floors above ground and ranks as the fourth-tallest building in China as well as the eighth-tallest worldwide. CITIC Tower will be the flagship building of Beijing’s comprehensively planned central business district core measuring close to 75 acres.  

READ MORE

Magnificent Metal Monday

Photo courtesy of Construction Dive

Construction begins on Texas Border Gates

Despite resistance on behalf of many lawmakers to commit to additional funding and also risking a possible government shut down later this month over this issue, construction on the border wall between Texas and Mexico is ongoing.  Construction Dive recently reported, ” U.S. Customs and Border Protection (CBP), along with the Army Corps of Engineers, announced the start of construction at another section of the U.S.-Mexico border wall, with the latest contract worth up to $5.7 million.” 

Continue reading

Magnificent Metal Monday

181022090823-03-hong-kong-macau-zhuhai-bridge-1019-exlarge-169

World’s longest sea-crossing bridge opens between Hong Kong and China

Built to withstand a magnitude 8 earthquake, a super typhoon and strikes by super-sized cargo vessels, this 55-kilometer (34 mile) bridge incorporates 400,000 tons of steel — 4.5 times the amount in San Francisco’s Golden Gate Bridge and 60 times more steel than used to build the Eiffel Tower.

Opened last month, the $20-billion bridge connects Hong Kong and Macau to the mainland Chinese city of Zhuhai, marking the completion of the longest sea-crossing bridge ever built, nine years after construction began. Continue reading

Magnificent Metal Monday

 

images

We travel again to the site of METALCON 2018 to highlight our host city of Charlotte, North Carolina.  Located in the heart of downtown and standing at 60 stories and 871 feet high is the Bank of America Corporate Center.  It is the most widely known building in the Charlotte skyline and best known as the world headquarters for Bank of America.  When it was completed in 1992, it was and still remains the tallest building in Charlotte. It is among the tallest buildings on the East Coast behind buildings in New York City, Philadelphia, and Atlanta. Continue reading

METALCON Partner Selects Metal Construction for New Headquarters

image002Convention Data Services Headquarters in Bourne, Massachusetts

Aesthetics, construction time and costs were key factors when METALCON‘s long standing partner, Convention Data Services (CDS), made the decision to use metal for building their new 30,000 square foot headquarters.  CDS has been one of METALCON’s business partners since the show’s inception providing registration and lead retrieval services.  Having outgrown their former office space, CDS turned to the industry they have worked with for over 25 years to construct their new Headquarters in Bourne, Massachusetts. Continue reading

Magnificent Metal Monday

Header_nieuwhavenhuis_avondThe new Port House in Antwerp, Belgium, which opened in 2016, repurposed, renovated and extended a derelict fire station into a new headquarters for the port – and brought together the port’s staff that previously worked in separate buildings around the city.  Renowned architect, Zaha Hadid’s design of the Antwerp Port Authority’s head office puts the Port of Antwerp on the architectural world map. The structure is an amazing story of steel and glass working together to make a future-proof, sustainable architectural phenomenon.  Built between 2009 – 2016, the building will also be known as Zaha Hadid’s final project as she died unexpectedly soon after its completion. Continue reading

Magnificent Metal Monday

 

On a recent trip to New Jersey, I had the distinct pleasure of crossing the Hudson River on the NEW $3.98 billion Governor Mario M. Cuomo Bridge!  The new bridge replaces the former Tappan Zee Bridge, which was built between 1952 and 1955 and served as one of New York’s primary crossings north of the city.  This new lasting icon is 3.1 miles long and is the largest single design-build contracts for a transportation project in the United States. Located less than 20 miles north of New York City, the cable-stayed span crosses one of the widest parts of the river and will be the largest bridge in New York State history.

Continue reading

Magnificent Metal Monday

Building an airport fit for a Queen!  Charlotte-Douglas International Airport in Charlotte, North Carolina (the “Queen’s City”),is underway with a $2.5 billion capital plan, Destination CLT, that will expand and modernize the facility, allowing the airport to accommodate an expected increase in passenger flow.  While the ongoing projects are not expected to be fully complete until 2026, METALCON attendees will enjoy some upgraded amenities when the trade show convenes in October.

METALCON attendees will be some of the first travelers to get a glimpse of one of the major projects known as the “Elevated Roadway and Terminal Curb Front” project.  This $50 million project will add more lanes for cars picking up and dropping off and add sky bridges for people walking to the parking decks.

Other current projects include:

  • Nine gates, and associated infrastructure, at Concourse A ($200 million)
  • 51,000-square-foot, three-level addition at Concourses D and E that includes pet and children’s areas, a food court and 12,000 square feet of office space ($29 million)
  • Terminal improvements and renovations ($70 million).

Future projects in the design and planning stages include:

  • 25,000-square-foot expansion of Concourse E ($30 million)
  • Terminal lobby expansion ($247 million)
  • Fourth runway ($422 million)
  • 16-gate expansion of Concourse A ($300 million)
  • 10 to 12 gate expansion of Concourse C ($463 million)
  • 8 to 10 gate expansion of Concourse B ($463 million)
  • An air traffic control tower with no current cost estimate

http://www.cltairport.com/News/Pages/DestinationCLTProjects.aspx

https://www.charlotteagenda.com/127194/charlottes-airport-is-in-the-middle-of-2-5-billion-in-construction-see-the-latest-on-8-major-projects/

“Royal” Metal

band blur close up engagement

Photo by Pixabay on Pexels.com

As we head into the Royal Wedding weekend, we are reminded yet again of the integral role that metal plays in all aspects of daily and worldly life.  In this case, the royal wedding rings!  Traditionally, royal wedding rings are made from Clogau, or Welsh, gold. This tradition dates back to 1923 and the wedding of George VI and Elizabeth Bowes Lyon (the Queen Mother, Harry’s great-grandmother).  The royal family had been gifted a nugget of gold from the now-defunct Clogau St David’s mine in North Wales.   Continue reading

Big Win for Solar Energy

pexels-photo-421888.jpegBreaking News!  This week California became the first state to mandate solar panels on new home construction.  As reported by the Wall Street Journal, “The California Energy Commission voted unanimously to approve a mandate that residential buildings up to three stories high, including single-family homes and condos, be built with solar installations starting in 2020.”  Final approval will be made by the Building Standards Commission later this year.   Continue reading

Magnificent Metal Monday

adelanto1Innovation happens when two metal manufacturing companies team up!  When McElroy Metal wanted to add solar panels to its California manufacturing plant, they called on fellow METALCON exhibitor, S-5! to assist.  Although their California plant didn’t necessarily need a new roof, after seeing the success they had from installing solar panels to their facility in Peachtree City, GA, McElroy decided it was worth the investment.  After almost five years, the energy generated at the McElroy Peachtree City facility surpassed the plant’s energy consumption, saving the company thousands of dollars.  McElroy expects to offset their California plant’s electrical usage and show a return on investment in approximately three years. Continue reading

3D Printing is Scaling Up

15403638_1050394055071544_8613181620439418733_oPhoto Credit:  METALCON/AMIE on display at METALCON 2016

We continue to explore how 3D printing has the potential to “remodel the construction industry.”  As featured in Monday’s blog post, Amsterdam is poised to install the first 3D printed bridge made entirely from steel in 2019.  Structures built with 3D printing are popping up in locations such as Dubai, China, Italy, Russia and El Salvador.  It is also a subject that is appearing with more regularity in construction and technology trades and in mainstream news sources.  As reported by the Wall Street Journal just this month, “3-D printing is scaling up. All over the world, an impressive diversity of people and organizations, ranging from startups and hobbyists to construction and engineering firms, are successfully prototyping 3-D-printed buildings.” Continue reading

Las Vegas Stadium – A Step Closer to Reality

las_vegas_stadiumArtist’s rendering showing the front of Las Vegas Stadium with the retractable windows and planned Al Davis memorial torch; Photo credit: Wikipedia

Las Vegas is one step closer to making their new state-of-the-art Stadium a reality, according to Construction Dive.  The Clark County Board of County Commissioners voted to approve the sale of $750 million in general obligation bonds to help pay for construction of the nearly $2 billion stadium.  The National Football League team, the Raiders, who are currently based in Oakland, CA, are looking to start their 30-year lease with the 2020 season at the new 65,000-seat stadium that will be built across the freeway from the Las Vegas Strip.  Continue reading

Valspar Teams up with CENTRIA to Provide Architectural Solution for Neil Armstrong Academy

neil-armstrong-academy4_photo-cred-neil-armstrong-academy

When Granite School District in West Valley City, Utah was looking to build a new elementary school dedicated to science, technology, engineering and math, its goal was to design more than just an ordinary education facility.  Continue reading

Introduction to Construction Robotics

 

crlogo

Change in the world of construction is certainly happening at a faster rate than we may think. How will this example of technology impact the metal construction world? Well, I will say that if it can do this with bricklaying, then it will certainly  Continue reading

How to Prepare for your Metal Roofing Jobs

Our friends over at http://www.designandbuildwithmetal.com recently published an article that pertains to a lot of the metal roofers out there. Contributing to the article was Harry Schouten of Advanced Architectural Sheet Metal & Supply.

Continue reading

Steel Falls Nine Floors Onto Workers

ezz-steel

Grant Prior – Construction  Enquirer – Two workers were left with broken bones but escaped with their lives after being struck by a length of steel that fell from nine floors above them.  Continue reading

Do you want to Grow your Business?

upcoming-courses

For the past few weeks we have been talking quite a bit about the Learning Zones and the great presentations you will have access to on the show floor, but have you considered the Continue reading

Throwback Thursdays

throwback thursday

In honor of Throwback Thursdays we are going to revisit METALCON Atlanta 2011. While these may not actually be real people it still qualifies  Continue reading

Construction Education Blast-Off

LearningZoneLogo

For the first time ever attendees will have access to two areas on the show floor for education at no extra charge. The new, innovative Learning Zone’s in booths 2117 and 341 give you the chance to manage your time accordingly with 15 minute sessions. REGISTER TODAY!

Attend METALCON

300X250

Did you realize that registration is now open for METALCON? Well, today is your lucky day if you didn’t realize it. Most of you know that this is the world’s leading metal construction trade show and the most important people in the industry will be there, so to take advantage of the early bird discounts click on REGISTER NOW!

Recap of METALCON 2013

It is Throwback Thursdays and this video doesn’t exactly qualify for it since it is less than a year old. However, it is a good piece for all of our readers to check out especially if you haven’t been to METALCON. Watch, enjoy and then REGISTER BY CLICKING HERE.